HOME AUTOMATION WIRELESS


TIS-AIR PANELS

VEN-2S-2R-HC

VENERA ON/OFF LIGHTING PANELS AVAILABLE IN 2-3 BUTTON COMBINATIONS, CAN CONTROL VIA RELAY CHANNELS AND CAN BE SET TO CONTROL SCENES BY SENDING COMMANDS TO OTHER DEVICES IN THE TIS SYSTEM.

AU$141.90

VEN-3S-3R-HC

VENERA ON/OFF LIGHTING PANELS AVAILABLE IN 2-3 BUTTON COMBINATIONS, CAN CONTROL VIA RELAY CHANNELS AND CAN BE SET TO CONTROL SCENES BY SENDING COMMANDS TO OTHER DEVICES IN THE TIS SYSTEM.

AU$151.80

VEN-4S-4R-HC

VENERA ON/OFF LIGHTING PANELS AVAILABLE IN 4 BUTTON COMBINATIONS, CAN CONTROL VIA RELAY CHANNELS AND CAN BE SET TO CONTROL SCENES BY SENDING COMMANDS TO OTHER DEVICES IN THE TIS SYSTEM.

AU$158.40

VEN-1D-UV

The VENERA Universal Dimmer is a 1-channel dimmer controlled by 3 buttons: ON/OFF, Ramp Up, and Dim Down. Use both a line and a neutral connection to power the Venera panel. Capable of MOSFET dimming and switching, it can dim most load types.

AU$173.25

VEN-AC-3R-HC

The VENERA AC Panel is designed to allow very simple control of your air conditioning. Using four standard buttons, with an integrated 1” OLED display, you simply press the up/down button to adjust the temperature to your desired level. Ensuring that your desired temperature level is achieved, the panel’s integrated thermal sensor is able to display the current temperature and maintain the room setting temperature. With Venera AC, you can control both your floor heater and your FCU unit. It can also be programmed to control split AC or VRV AC.

AU$189.75

VEN-AC-4R-HC

The VENERA AC Panel is designed to allow very simple control of your air conditioning. Using four standard buttons, with an integrated 1” OLED display, you simply press the up/down button to adjust the temperature to your desired level. Ensuring that your desired temperature level is achieved, the panel’s integrated thermal sensor is able to display the current temperature and maintain the room setting temperature. With Venera AC, you can control both your floor heater and your FCU unit. It can also be programmed to control split AC or VRV AC.

AU$199.65

TIS-AIR CONTROLLERS

ADS-2R-2Z

ADS 2R & 3R AIR Dimmer & Switch Module (ADS) Used to ON/OFF for lights and other appliances to operate motors that open and close curtains.

AU$100.65

ADS-3R-3Z

ADS 2R & 3R AIR Dimmer & Switch Module (ADS) Used to ON/OFF for lights and other appliances to operate motors that open and close curtains.

AU$105.60

ADS-1D-1Z

ADS 2R & 3R AIR Dimmer & Switch Module (ADS) Used to ON/OFF for lights and other appliances to operate motors that open and close curtains.

ADS-4CH-0-10V

ADS 2R & 3R AIR Dimmer & Switch Module (ADS) Used to ON/OFF for lights and other appliances to operate motors that open and close curtains.

AU$89.10

ACM-1R-1Z

Air couplers are small size modules primarily installed behind traditional switches to convert them to smart switches, allowing any device connected through TIS AIR to be controlled via the network.

ACM-2R-2Z

Air couplers are small size modules primarily installed behind traditional switches to convert them to smart switches, allowing any device connected through TIS AIR to be controlled via the network.

AU$100.65

ACM-1D-2Z

Air couplers are small size modules primarily installed behind traditional switches to convert them to smart switches, allowing any device connected through TIS AIR to be controlled via the network.

AIR-1IRE-T

AIR-1IRE-T with one infrared emitter port and one temperature sensor input. Used mainly for split AC to be controlled and monitored by your application, through which you can view and adapt your split anywhere.

AU$115.50

AIR-2IRE

Air-2IRE with separated 2 Infrared ports used for home theater and to control 2 device with same brand separately with the ability of 2 ports of infrared sending by one device.

AU$120.45

TIS-AIR SENSORS

AIR-PIR-CM

The AIR-PIR-CM is a motion detector with one lighting relay switch, which is suitable for areas in which lights only need to respond to motion.

AIR-PIR-2R-CM

The AIR-PIR-2R-CM is a motion detector with two lighting relay switch, which is suitable for areas in which lights only need to respond to motion.

AU$132

AIR-ES-IR

The AIR-ES-IR is a ceiling mounted PIR motion detector with 180-degree infrared emitters and one lighting relay switch channel. It also has 32 logic lines available, which allow for integration. Its logic capabilities allow for maximum energy savings by controlling your climate and ensuring efficient use of systems when required.

AU$151.80

ACM-3Z-IN

ACM-3Z-IN AIR 3 CHANNEL DRY CONTACT INPUTS is a WiFi module that enables you to convert a traditional switch, into a smart switch capable of controlling any TIS Air device. Also, it can be connected to other sensors, including magnetic sensors used for door and window security, N/C N/O PIR detectors, TIS Water Leakage sensors, and any other dry contact signal linked to it.

AU$89.10

TIS-AIR GATEWAYS

TIS-AIR-BUS

Designed to bridge the gap between wired and wireless Bus installations. The mini Converter enables fast and efficient upgrades to be completed almost instantly. With automatic address setting, all you need to do is connect the converter to your selected wired module and configure it by using your Android or iOS device Air Bus is a module designed to link between wired TIS-BUS systems and wireless TIS-AIR Installations.

AU$94.05

TIS-AIR-BUS-3W

Designed to bridge the gap between wired and wireless Bus installations. The mini Converter enables fast and efficient upgrades to be completed almost instantly. With automatic address setting, all you need to do is connect the converter to your selected wired module and configure it by using your Android or iOS device Air Bus is a module designed to link between wired TIS-BUS systems and wireless TIS-AIR Installations.

AU$115.50

IP-COM-PORT

The IP Port with RS 232 and RS 485 ports is used for programming and controlling 3rd-party devices and for connecting to our free app for iOS and Android devices.

AU$358.05